Post-update edge problem - Microsoft Community

hi there

after installed windows 10 update 1703 on laptop microsoft edge has troubles loading website. when click go on edge comes 'start' on tab , loads 30 mins until says cant reach page 

when try load apps steam can't connect reason , when restarting laptop discord app automatically opens reason , tries search updates though updated

thanks response in advance

 does problem occur in other browsers too?  

if involves more internet connection issues start going on windows 10 performance , install integrity checklist - microsoft community make sure install set correctly, optimized best performance, , needed repairs done. 

for internet issues follow these steps

how resolve connection issues in windows 10 creators update

troubleshoot router/modem

for starters, let’s check out external causes before start device. usually, connection issues related router or modem. so, let’s try these steps , can resolve issue:

• shut down router or modem. wait minute , power on.
• try using wired connection instead of wireless one. plug in lan cable , check changes.
• disable modem/router built-in firewall temporarily.
• if using a router, make sure there no walls blocking signal. additionally, don’t place near device because can interfere with signal.
• reset modem/router factory settings.
• on router, disable wps (wi-fi protected setup) , try connect using standard methods.
• check cables , make sure connected. if you’re not sure how set up, search online support.
• make sure check router/modem overheating. place far temperature sources.

now, let’s move down system-related workarounds.

use internet connection troubleshooter

with creators update, microsoft got creative troubleshooting. now, you’ll able use 1 unified troubleshooting page various issues. 1 of these internet connection troubleshooter can use connection-related issues. how use it.

1. press windows key  + open settings.
2. open update & security.
3. navigate troubleshoot.
4. click on the internet connection troubleshooter.
5. wait procedure finish , possibly resolve issues.

this seems interesting addition. unified troubleshoot page, you’ll able reach individual tools without trouble.

update network drivers

the router may function intended but, without appropriate drivers, you’re going have issues connection. windows 10 known update issues provoked forced driver updates. namely, ‘auto updating drivers’ feature is intended helpful innovation provokes lot of problems different devices. , in case, network adapters. so, let’s check out drivers can move down workarounds:

1. right-click start , open device manager.
2. locate network adapters.
3. right-click network adapters , click ‘update driver software’. make sure both lan , wlan adapters.
4. after procedure finished, restart pc , try connecting.
5. however, if problem still there, go device manager > network adapters.
6. right-click network adapter , open properties.
7. in driver tab, click uninstall.
8. now, open details tab , locate driverids in drop-down list.
9. copy the first line , paste browser.
10. find appropriate drivers provided official hardware manufacturer.
11. download , install drivers both lan , wlan respectively.
12. restart pc , checkup connection again.

once you’ve taken care of drivers pc still unable connect network, try additional workarounds.

reset tcp/ip stack

another solution proved helpful on various occasions related tcp/ip stack. namely, can resolve possible confusion within system connection setup resetting tcp/ip stack. if you’re not accustomed procedure, follow detailed explanation below.

1. right-click start , run command prompt (admin).
2. in command line, type following commands , press enter after each one:
   • netsh int ip reset
   • netsh int tcp set heuristics disabled
   • netsh int tcp set global autotuninglevel=disabled
   • netsh int tcp set global rss=enabled
3. reboot pc , try connect. if problem still there, make sure try out remaining steps below.

disable windows firewall temporarily

disabling windows firewall is highly risky deed but, on occasions, faithful protector of system can block network no apparent reason. so, try , disable temporarily , check improvements. how can disable windows firewall:

1. open control panel.
2. open system , security.
3. click on windows firewall.
4. select turn windows firewall on or off left side.
5. turn off windows firewall both private , public networks , confirm selection.
6. try connecting.

in case windows firewall isn’t culprit connection issues, make sure enable it.

disable airplane mode

moreover, should check airplane mode. if you’ve accidentally enabled it, block connections. additionally, there’s chance creators update enabled on own. these instructions disable airplane mode:

1. you should find airplane mode icon in notification panel in right corner of desktop. however, if icon missing, there’s alternative way disable it.
2. open settings.
3. click network & internet.
4. click airplane mode.
5. toggle airplane mode off.

source:  can’t connect internet after installing windows 10 creators update [fix]

Microsoft Edge / All other issues / Windows 10